AP 118 · No. 11 Section II · Aircraft Plate 22 / 520

Plate 22 of 520 · Great War · Heavy bomber

Caproni Ca.3 (Ca.33)

Ca.3 (Ca.33), Ca 1158, painted as the Caproni Ca.3 Ca 1158 of the Corpo Aeronautico Militare, as photographed in 1917 (no Ca.3 is in a UK museum), modelled from a period three-view drawing and photographs: Italy’s three-engined twin-boom heavy bomber, 22.2 m in span, with Isotta Fraschini engines on the booms and behind the crew nacelle, twin nosewheels and a tricolour on each of its three fins, in clear-doped linen with varnished-wood struts..

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as the Caproni Ca.3 Ca 1158 of the Corpo Aeronautico Militare, as photographed in 1917 (no Ca.3 is in a UK museum), modelled from a period three-view drawing and photographs: Italy’s three-engined twin-boom heavy bomber, 22.2 m in span, with Isotta Fraschini engines on the booms and behind the crew nacelle, twin nosewheels and a tricolour on each of its three fins, in clear-doped linen with varnished-wood struts.. Drag to orbit, scroll or pinch to zoom · download .glb (681 KB)

Data plate

Specification

First flight, number built and top speed are for the whole family (Ca.33); engine, crew and dimensions are for the Ca.3 (Ca.33), Ca 1158 modelled here.

History

The Ca.3

Gianni Caproni began work on a large multi-engined bomber before Italy entered the First World War. His first aircraft, the Ca.30, flew in October 1914, and the Ca.31 and Ca.32 followed. The Ca.3, which the army knew as the Ca.33 from 1917, was the production form: a biplane with a short crew nacelle between two long tail booms, an engine on the front of each boom and a third behind the nacelle, driving a pusher propeller.

The layout left the nose clear for a gunner with a Revelli machine gun and put the pilot and a second crew member side by side behind him. Another gunner stood on a platform at the rear of the nacelle. The aircraft carried a bomb load of about 450 kg and flew at around 85 mph, which was slow, but its range and load were much better than those of any other Italian aircraft of the time. It joined the Italian bomber squadrons in 1915 and flew raids against Austro-Hungarian targets in the Alps, along the Isonzo front and on the Adriatic coast.

About 250 Ca.3s were built in Italy, and a number were built in France under licence. Britain and France operated them too, and the Royal Naval Air Service used a few. The type led to the larger Ca.4 triplane and the Ca.5, and it did much to establish the idea of strategic bombing in Italy. No Ca.3 is in a British museum, and the survivors and reproductions are in Italy.

This airframe

Ca.3 Ca 1158, Corpo Aeronautico Militare

Ca 1158The airframe modelled

No Ca.3 is in a UK museum, so the model follows Ca 1158, a bomber of the 1917 batch of the Corpo Aeronautico Militare, from a period three-view drawing and photographs. It has clear-doped linen on the wings, tailplane and booms, a slightly greyer finish on the nacelle and engine pods, pale varnished wooden struts and black steel undercarriage, black ‘Ca 1158’ on the nacelle side, two black diamonds on each boom and a green, white and red tricolour on each of the three fins. The starboard markings repeat the port side, and no markings are painted on the wings because none shows in any photograph.

Where to see one

Not on charge

Survivors and reproductions are in Italian museums. None is in a UK museum.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.