3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Lockheed AH-56A Cheyenne 66-8832, the seventh of ten prototypes (Lockheed c/n 1007), preserved at the US Army Aviation Museum at Fort Novosel, Alabama (no Cheyenne is in a UK museum): the US Army’s cancelled compound attack helicopter, with a single General Electric T64 turboshaft driving a rigid four-bladed main rotor 51 ft 3 in across, a four-bladed anti-torque rotor and a three-bladed pusher propeller at the tail, low-set stub wings, a stepped tandem cockpit for gunner and pilot and retractable main wheels, shown parked on its wheels with the rotor in an X as displayed in 2003: olive drab overall, with insignia-blue ‘ARMY’ and the star-and-bar on each side of the tail boom, a yellow boom band with a red arrow pointing aft, black ‘U.S.ARMY’ over ‘68832’ on the ventral fin, red covers on the engine exhausts, yellow rescue arrows pointing to the canopy and a star-and-bar on the port wing; the nose and belly gun turrets are not fitted, as photographed, and no lower-wing insignia is painted because no photograph shows the underside. Drag to orbit, scroll or pinch to zoom · download .glb (1.1 MB)
Data plate
Specification
- First flight21 September 1967
- Built10
- Top speed~240 mph
- Engine1 × General Electric T64-GE-16 turboshaft, 3,925 shp
- Crew2
- Main rotor15.62 m
- Length, rotors turning16.66 m
- Height4.18 m
- In servicePrototypes only: flown by Lockheed and the US Army from 1967 to 1972; never entered service
- RoleCompound attack helicopter
- MakerLockheed, United States
- UK collections—
First flight, number built and top speed are for the whole family (AH-56A); engine, crew and dimensions are for the AH-56A Cheyenne 66-8832, US Army Aviation Museum, Fort Novosel modelled here.
History
The AH-56A Cheyenne
In the early 1960s the US Army wanted a fast, heavily armed helicopter to escort its troop-carrying Hueys and attack enemy armour, and in 1964 it launched the Advanced Aerial Fire Support System competition. Lockheed won in November 1965 against Sikorsky, and ten prototypes were ordered. Lockheed’s design was a compound helicopter: low stub wings took much of the lift at speed, and a pusher propeller at the tail gave the thrust, so the rigid four-bladed main rotor did not have to drag the aircraft forward and could be unloaded in fast flight. A small anti-torque rotor sat on the tip of the horizontal tail, and the main wheels retracted.
The first Cheyenne flew on 21 September 1967, and in January 1968 the Army placed a production order for 375. It was far more capable than the Huey gunships then fighting in Vietnam. The gunner sat in front in a seat that turned with his periscope sight, aiming a nose turret with a 40 mm grenade launcher or a 7.62 mm minigun and a belly turret with a 30 mm cannon, while the wings could carry TOW anti-tank missiles and rockets. A Cheyenne reached about 245 mph in level flight, much faster than any other helicopter of the time, and it had advanced navigation and night-vision equipment.
Development was troubled. On 12 March 1969 the third prototype was destroyed when its rotor became unstable at high speed, killing the pilot, and in May the Army cancelled the production contract, though testing went on to cure the problems. The Air Force argued that close air support was its job and pressed for its A-X attack aircraft, which became the A-10, and the Marine Corps chose the cheaper AH-1J SeaCobra. With the cost per aircraft rising, the Army finally ended the programme on 9 August 1972 and started again with the Advanced Attack Helicopter competition, which produced the AH-64 Apache. Four Cheyennes survive in the United States, and none is in a UK museum.
This airframe
AH-56A Cheyenne 66-8832, US Army Aviation Museum
No Cheyenne is in a UK museum, so the model follows the best-photographed of the four survivors in the United States: AH-56A 66-8832, the seventh of the ten prototypes (Lockheed construction number 1007), preserved at the US Army Aviation Museum at Fort Novosel, Alabama. The model shows it as photographed outdoors there in 2003, parked on its wheels with the main rotor in an X. It is olive drab overall, with insignia-blue ‘ARMY’ and the star-and-bar on each side of the tail boom, a yellow band round the boom with a red arrow pointing aft, black ‘U.S.ARMY’ over ‘68832’ on the ventral fin, red covers on the two engine exhausts and small yellow rescue arrows pointing to the canopy. There is a star-and-bar on top of the port wing. The nose and belly gun turrets are not fitted, so the model shows the nose sight housing and a low fairing under the belly instead. The shape was measured from a three-view drawing and checked against photographs of this airframe, and matches the published rotor diameter, length and height. Some details are less certain. The drawing shows the wheels retracted, so their position and the ground line come from side-on photographs. The tail rotor and propeller are built at 2.7 m and 2.6 m across, following the drawing and photographs rather than the often-quoted 10 ft. No photograph shows the underside, so no insignia is painted under the wings. The rotor head, the landing gear and the cockpit interior are simplified, and small stencils are not painted.
Where to see one
Not on charge
Survivors are in US museums. None is in a UK museum.