AP 118 · No. 11 Section II · Aircraft Plate 186 / 520

Plate 186 of 520 · Second World War · Twin-engined heavy fighter

Messerschmitt Me 210

Me 210 A-1, 2H+DA, painted as a Messerschmitt Me 210 A-1 of Versuchsstaffel 210 (code 2H+DA, France, 1942), a type of which no complete airframe survives (none is in a UK museum), modelled from a three-view drawing and wartime photographs of 2H+DA: the twin-engined heavy fighter, 16.3 m in span, with a deep glazed cockpit, remotely controlled barbette guns on the fuselage sides and a single fin, finished in RLM 74/75 splinter over pale RLM 76 undersides, with black-and-white crosses and the swastika on the fin..

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as a Messerschmitt Me 210 A-1 of Versuchsstaffel 210 (code 2H+DA, France, 1942), a type of which no complete airframe survives (none is in a UK museum), modelled from a three-view drawing and wartime photographs of 2H+DA: the twin-engined heavy fighter, 16.3 m in span, with a deep glazed cockpit, remotely controlled barbette guns on the fuselage sides and a single fin, finished in RLM 74/75 splinter over pale RLM 76 undersides, with black-and-white crosses and the swastika on the fin.. Drag to orbit, scroll or pinch to zoom · download .glb (1.2 MB)

Data plate

Specification

First flight, number built and top speed are for the whole family (Me 210A); engine, crew and dimensions are for the Me 210 A-1, 2H+DA modelled here.

History

The Me 210

The Me 210 was meant to replace the Messerschmitt Bf 110 as the Luftwaffe's Zerstörer, or heavy fighter. It was a smaller, faster and more heavily armed aircraft, with a deep, narrow fuselage, a single fin and, on each side of the rear fuselage, a remotely controlled barbette carrying a machine gun that the gunner aimed through a periscope sight.

The design was ordered into production before the prototype had been properly tested, and the aircraft that came out of it handled badly. It could stall and spin without warning, it was unstable in pitch, and the first prototypes were lost in accidents. Production stopped in 1942 after some 350 had been built, and the factory went back to building the Bf 110 while the design was reworked.

The reworked aircraft, with longer rear fuselage and DB 603 engines, became the Me 410 Hornisse, which proved far more successful. A few Me 210s flew in operational units, mainly as fighter-bombers and reconnaissance aircraft, and a Hungarian-built version, the Me 210 Ca, served into 1944. No complete Me 210 survives, and no UK museum holds one.

This airframe

Me 210 A-1, code 2H+DA

2H+DAThe airframe modelled

No Me 210 survives and none is held by a UK museum, so the model follows 2H+DA, an Me 210 A-1 of Versuchsstaffel 210 photographed in France in 1942, as shown in two Bundesarchiv photographs. The works number cannot be read, so none is painted. It is built from a three-view drawing of the A-1 and from those photographs. The upper surfaces are RLM 74/75 splinter with dark fuselage sides and fin, the undersides pale RLM 76, with black-and-white crosses on the fuselage and wings, a swastika on the fin and the code ‘2H’ and ‘A’ on either side of the cross. The green ‘D’ is small because it cannot be seen in the photographs.

Where to see one

Not on charge

No complete example survives.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.