3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Mil Mi-26 Halo heavy-lift helicopter, the Russian Air Force Mi-26 RF-95570 '11 yellow' in its 2017 overall mid-grey scheme (no Mi-26 is in a UK museum): a deep slab-sided fuselage with a glazed nose, an eight-blade main rotor over a dorsal gearbox fairing, two engine pods with round side ducts, a five-blade tail rotor on the port side of a swept fin, and a nosewheel with twin main wheels, shown with the rotor blades drooped as parked: light-grey blades with red tip caps, a red star on the upswept rear fuselage, white 'ВВС РОССИИ' and 'RF-95570' on the tail boom and a yellow '11' on the dorsal fairing, with wet-streak weathering; the same airframe later flew in camouflage over a light-blue underside, which is not shown; the parked blade angles and droop, the nose gear detail and the position of the '11' are approximate, and the doors are closed and the cargo hold and cockpit interior are not modelled. Drag to orbit, scroll or pinch to zoom · download .glb (1.4 MB)
Data plate
Specification
- First flight14 December 1977
- Built~300
- Top speed~180 mph
- Engine2 × Lotarev D-136 turboshaft, 11,400 shp each
- Crew5
- Main rotor32 m
- Length, rotors turning40.03 m
- Height8.15 m
- In service1983–present (Soviet Union, Russia and export users)
- RoleHeavy-lift helicopter
- MakerMil OKB; built at Rostov-on-Don, Soviet Union
- UK collections—
First flight, number built and top speed are for the whole family (Mi-26); engine, crew and dimensions are for the Mi-26 RF-95570 '11 yellow', Russian Air Force modelled here.
History
The Mi-26
The Mi-26 was designed by Mil’s bureau as a successor to the Mi-6, to carry heavy loads, including loads too big for any other helicopter, into country with no airfields. It first flew on 14 December 1977, and NATO called it the Halo. It remains the heaviest helicopter ever to enter series production.
Its two Lotarev D-136 turboshafts drive an eight-blade main rotor 32 metres across, the first on a helicopter of this size to use a rotor of this kind, and the hold is about as large as that of a small airliner, with a rear ramp for vehicles. It can lift about 20 tonnes inside or under the fuselage, and on a record flight in 1982 it carried a load of over 56 tonnes to 2,000 metres.
Around 300 have been built at Rostov-on-Don. They have flown for the Soviet and Russian armed forces, for civil operators and for the United Nations, and have been used to move bulldozers, oil-field rigs, aircraft and the wreckage of crashed helicopters. The model is a Russian Air Force Mi-26. None is in a UK museum.
This airframe
Mi-26 RF-95570 “11 yellow”, Russian Air Force
No Mi-26 is in a UK museum, so the model follows the Russian Air Force Mi-26 RF-95570, “11 yellow”, which is well photographed on both sides. Its shape was measured from a published three-view drawing and fitted to the published dimensions. It is shown in its 2017 overall mid-grey scheme with wet-streak weathering, light-grey blades with red tip caps, a red star on the upswept rear fuselage, “ВВС РОССИИ” and “RF-95570” in white on the tail boom and a yellow “11” on the dorsal fairing. The same airframe later appears in camouflage over a light-blue underside, which is not shown. The parked blade angles and droop, the nose gear detail and the position of the “11” are approximate, and the doors are closed and the cargo hold and cockpit interior are not modelled.
Where to see one
Not on charge
Still in service. None is in a UK museum.