3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Mil Mi-6A Hook heavy transport helicopter, the Ukrainian Air Force Mi-6A '78' (c/n 0562) preserved outdoors at the Oleg K. Antonov State Aviation Museum of Ukraine, Kyiv-Zhulyany (no Mi-6 is in a UK museum): a hump-backed fuselage with a glazed nose, a five-blade main rotor over the hump, a four-blade tail rotor on a swept fin, short stub wings with a strut to the fuselage, twin engine intakes with orange blanking covers, and a nosewheel with twin main wheels, shown with the rotor blades drooped as parked: weathered light grey overall as photographed in 2010 to 2019, black anti-slip on the upper wing roots, a faded Ukrainian roundel on the rear fuselage, the old Soviet star showing beyond it on the port side only, and '78' on the forward fuselage; the museum later repainted it green with a red '22', which is not shown; the parked blade angles, the port porthole positions beyond the first three and the tail rotor angle are approximate, and the engine exhausts and cockpit interior are not modelled. Drag to orbit, scroll or pinch to zoom · download .glb (1.8 MB)
Data plate
Specification
- First flight5 September 1957
- Built~900
- Top speed~185 mph
- Engine2 × Soloviev D-25V turboshaft, 5,500 shp each
- Crew5
- Main rotor35 m
- Length, rotors turning33.18 m
- Height9.86 m
- In service1960–present (Soviet Union, Russia and export users)
- RoleHeavy transport helicopter
- MakerMil OKB; built at Rostov-on-Don, Soviet Union
- UK collections—
First flight, number built and top speed are for the whole family (Mi-6); engine, crew and dimensions are for the Mi-6A '78', Antonov State Aviation Museum, Kyiv modelled here.
History
The Mi-6
The Mi-6 was designed by Mikhail Mil’s bureau to carry heavy loads to places with no roads. It first flew on 5 September 1957 and was the largest and fastest helicopter in the world for a time, with a power plant that was then unmatched. NATO called it the Hook.
Its two Soloviev turboshafts drove a five-blade main rotor 35 metres across, and short stub wings took some of the lift in cruise, so the rotor could be relieved of up to a fifth of its load. Clamshell doors at the back of the cabin let it carry vehicles, and it could lift about 12 tonnes inside or hang a load beneath.
About 900 were built at Rostov-on-Don. They carried troops, missiles and construction loads across the Soviet Union and flew with a long list of export users, and the type was used to fight fires and to build pipelines and power lines in remote country. Its airframe also gave rise to the Mi-10 flying crane. A few survive in service, and none is in a UK museum.
This airframe
Mi-6A “78”, Antonov State Aviation Museum, Kyiv
No Mi-6 is in a UK museum, so the model follows the Ukrainian Air Force Mi-6A numbered “78” (c/n 0562), preserved outdoors at the Oleg K. Antonov State Aviation Museum of Ukraine at Kyiv-Zhulyany, which has been photographed from every side. Its shape was measured from a published three-view drawing and fitted to the published fuselage length and wing span. It is shown as it appeared from 2010 to 2019: weathered light grey overall, black anti-slip on the upper wing roots, a faded Ukrainian roundel on the rear fuselage with the old Soviet star showing beyond it on the port side only, and “78” below the first portholes. The museum has since repainted it green with a red “22”, which is not shown. The parked blade angles, the porthole positions beyond the first few and the tail rotor angle are approximate, and the engine exhausts and cockpit interior are not modelled.
Where to see one
Not on charge
Survivors are in museums abroad. None is in a UK museum.