AP 118 · No. 11 Section II · Aircraft Plate 134 / 520

Plate 134 of 520 · Second World War · Fighter

Nakajima Ki-27 Otsu

Ki-27 Otsu, 50th Sentai, Burma, 1942, painted as Nakajima Ki-27 Otsu ‘Nate’ of the 1st Chutai, 50th Sentai, flown by Captain Fujio Sakaguchi and shot down near Rangoon on 24 January 1942, where it was photographed belly-landed with a No. 67 Squadron RAF pilot beside it: a single-seat Japanese Army fighter with a Nakajima Ha-1 Otsu nine-cylinder radial in a narrow-chord cowling driving a two-bladed propeller, a low wing spanning 11.31 m with a straight leading edge and rounded tips, an enclosed sliding hood with a raised rear decking, fixed main undercarriage in teardrop spats and a tail skid, shown tail down on its wheels: light grey-green overall, cowling included, plain red hinomaru without a white surround on the fuselage sides and above and below the wings, a white band ahead of the fin root with a broader dark band ahead of it and a broad dark diagonal stripe from the rudder across the fin and down the rear fuselage, painted red here as the 1st Chutai colour (shape from two Ki-27 three-views scaled to the published span and length, checked against photographs of the type; the markings follow the single wartime photograph of this aircraft, which shows its starboard rear quarter, and mirror to the port side; the lower-wing hinomaru follow standard Army practice).

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Nakajima Ki-27 Otsu ‘Nate’ of the 1st Chutai, 50th Sentai, flown by Captain Fujio Sakaguchi and shot down near Rangoon on 24 January 1942, where it was photographed belly-landed with a No. 67 Squadron RAF pilot beside it: a single-seat Japanese Army fighter with a Nakajima Ha-1 Otsu nine-cylinder radial in a narrow-chord cowling driving a two-bladed propeller, a low wing spanning 11.31 m with a straight leading edge and rounded tips, an enclosed sliding hood with a raised rear decking, fixed main undercarriage in teardrop spats and a tail skid, shown tail down on its wheels: light grey-green overall, cowling included, plain red hinomaru without a white surround on the fuselage sides and above and below the wings, a white band ahead of the fin root with a broader dark band ahead of it and a broad dark diagonal stripe from the rudder across the fin and down the rear fuselage, painted red here as the 1st Chutai colour (shape from two Ki-27 three-views scaled to the published span and length, checked against photographs of the type; the markings follow the single wartime photograph of this aircraft, which shows its starboard rear quarter, and mirror to the port side; the lower-wing hinomaru follow standard Army practice). Drag to orbit, scroll or pinch to zoom · download .glb (1.1 MB)

Data plate

Specification

First flight, number built and top speed are for the whole family (Ki-27 (Allied name ‘Nate’)); engine, crew and dimensions are for the Ki-27 Otsu, 50th Sentai, Burma, 1942 modelled here.

History

The Ki-27 ‘Nate’

In 1935 the Imperial Japanese Army asked Nakajima, Kawasaki and Mitsubishi for a new single-seat fighter to replace its biplanes. Nakajima’s design team, led by Yasumi Koyama, drew a small, light low-wing monoplane with fixed, spatted main wheels, an enclosed cockpit and a Nakajima Kotobuki nine-cylinder radial in a narrow cowling. Its wing was large for its weight, so it turned more tightly than any rival. The first prototype flew in October 1936, and after beating the Kawasaki Ki-28 and Mitsubishi Ki-33 in trials it was adopted at the end of 1937 as the Army Type 97 Fighter.

The Ki-27 went to war in northern China in 1938, where it quickly gained the upper hand over Chinese-flown Polikarpov fighters, and in 1939 it was the Army’s main fighter in the summer-long battle with the Soviet Union at Nomonhan, on the border of Mongolia and Manchuria. The improved Ki-27 Otsu, with a better hood and racks for small bombs or drop tanks under the wings, followed. It was light, easy to fly and very manoeuvrable, but carried only two 7.7 mm machine guns and no armour or self-sealing tanks.

When the Pacific war began in December 1941 the Ki-27 was still the Army’s most numerous fighter, and it fought over Malaya, the Philippines and Burma, where Allied pilots met it over Rangoon and gave it the code name ‘Nate’. It soon gave way to the Ki-43 Hayabusa in front-line units and spent the rest of the war as a trainer and home-defence fighter, and in 1945 some were flown on suicide attacks. Nakajima and Manshu in Manchuria built about 3,400. Thailand and Manchukuo also flew the type. No complete original Ki-27 survives; reconstructions built round recovered parts are displayed in Japan.

This airframe

Ki-27 Otsu, 1st Chutai, 50th Sentai, Rangoon, January 1942

The airframe modelled

No complete Ki-27 survives, so the model follows a single, well-recorded wartime example. Captain Fujio Sakaguchi of the 1st Chutai, 50th Sentai, flew this Ki-27 Otsu from Thailand against Rangoon, where the RAF’s No. 67 Squadron and the American Volunteer Group were defending the city. It was shot down on 24 January 1942 and belly-landed near Rangoon, and a photograph now in the Air Force Museum of New Zealand shows the wreck with Sergeant E. L. Sadler of No. 67 Squadron beside it. The model shows it as it was before that last flight, tail down on its wheels: light grey-green overall, cowling included, with plain red hinomaru on the fuselage sides and wings, a white band ahead of the fin with a broader band ahead of that, and a broad stripe running from the rudder across the fin and down the rear fuselage. The photograph is black and white, so the band and stripe are painted red, the colour of the 50th Sentai’s 1st Chutai, though another colour cannot be ruled out. Its shape comes from two Ki-27 three-views scaled to the published 11.31 m span and 7.53 m length, checked against photographs of the type. The photograph shows only the starboard rear quarter, so the port side mirrors it.

Where to see one

Not on charge

Replicas exist in Japan. None is in a UK museum.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.