AP 118 · No. 11 Section II · Aircraft Plate 46 / 520

Plate 46 of 520 · Great War · Biplane fighter

Pfalz D.IIIa

Pfalz D.IIIa D.8033/17, Jasta 64w, March 1918, painted as Pfalz D.IIIa D.8033/17 (works number 1663) of Jagdstaffel 64w, flown by Offizierstellvertreter Schuschke and forced down intact near Fléville, outside Nancy, on 27 March 1918 (no D.III or D.IIIa survives): a slender single-seat biplane fighter with a monocoque fuselage of moulded plywood strips, a 180 hp Mercedes D.IIIa six-cylinder engine under a smooth rounded cowling with the cylinder heads standing proud, two LMG 08/15 machine guns on top of the decking, a 9.4 m single-bay wing with a radiator in the upper centre section, the D.IIIa's rounded lower wingtips and enlarged tailplane, and a fixed undercarriage, shown resting tail-down on its skid; shape from a published three-view drawing and the Idflieg type sheet, scaled to the 9.40 m span and 6.95 m length and checked against wartime photographs of 8033/17 on display in the Place Stanislas, Nancy, with the finish those photographs show: Pfalz silver-grey overall, four black fuselage bands either side of the fuselage cross, black cross pattée Iron Crosses on the fuselage, rudder and wings, and the serial on the fuselage; the shade is inferred because every photograph is black and white, and the D.IIIa tailplane size is estimated from the photographs.

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Pfalz D.IIIa D.8033/17 (works number 1663) of Jagdstaffel 64w, flown by Offizierstellvertreter Schuschke and forced down intact near Fléville, outside Nancy, on 27 March 1918 (no D.III or D.IIIa survives): a slender single-seat biplane fighter with a monocoque fuselage of moulded plywood strips, a 180 hp Mercedes D.IIIa six-cylinder engine under a smooth rounded cowling with the cylinder heads standing proud, two LMG 08/15 machine guns on top of the decking, a 9.4 m single-bay wing with a radiator in the upper centre section, the D.IIIa's rounded lower wingtips and enlarged tailplane, and a fixed undercarriage, shown resting tail-down on its skid; shape from a published three-view drawing and the Idflieg type sheet, scaled to the 9.40 m span and 6.95 m length and checked against wartime photographs of 8033/17 on display in the Place Stanislas, Nancy, with the finish those photographs show: Pfalz silver-grey overall, four black fuselage bands either side of the fuselage cross, black cross pattée Iron Crosses on the fuselage, rudder and wings, and the serial on the fuselage; the shade is inferred because every photograph is black and white, and the D.IIIa tailplane size is estimated from the photographs. Drag to orbit, scroll or pinch to zoom · download .glb (1.2 MB)

Data plate

Specification

First flight, number built and top speed are for the whole family (D.IIIa); engine, crew and dimensions are for the Pfalz D.IIIa D.8033/17, Jasta 64w, March 1918 modelled here.

History

The D.IIIa

Pfalz Flugzeugwerke of Speyer, in Bavaria, had built Morane-Saulnier copies and Roland fighters under licence before Rudolf Gehringer designed the D.III, its first fighter of its own, in the spring of 1917. Its fuselage was a monocoque wrapped from thin strips of plywood over a mould, a method licensed from LFG Roland, which gave the aircraft its smooth, rounded lines. The 160 hp Mercedes D.III engine sat under a close-fitting cowling, the radiator was set into the upper wing, and the single-bay wings had a lower wing of much narrower chord, as on the Albatros fighters it served beside.

The D.III reached the front in the late summer of 1917, at first mostly with the Bavarian Jagdstaffeln. Pilots found it strong and steady in a dive, but slower to climb and less nimble than the Albatros D.V, and its two machine guns, buried inside the fuselage decking, were awkward to reach when they jammed. The D.IIIa of late 1917 answered some of these complaints: it had the more powerful Mercedes D.IIIa, the guns moved up on top of the decking, rounded lower wingtips and a larger tailplane.

The D.IIIa was built in greater numbers than the D.III, and some 1,000 of the two versions were made in all. Through the spring of 1918 it was one of the main German fighters on the Western Front, flown against the Sopwith Camel and S.E.5a, before the Fokker D.VII and Pfalz's own D.XII replaced it in the last months of the war. Several were captured intact and tested by the British and the French. No D.III or D.IIIa survives, and none is in a UK museum.

This airframe

D.IIIa D.8033/17, Jasta 64w, March 1918

D.8033/17The airframe modelled

No Pfalz D.III or D.IIIa survives and none is held by a UK museum, so the model follows D.IIIa 8033/17 (works number 1663) of Jagdstaffel 64w, flown by Offizierstellvertreter Schuschke, which came down intact near Fléville, outside Nancy, on 27 March 1918 and was put on public display in the Place Stanislas; eight wartime photographs of it, including true side views of both sides and a close-up of the cockpit and engine, make it one of the best-recorded single airframes of the type. It is shown as those photographs show it before the French repainted it: Pfalz silver-grey overall, four black bands around the fuselage, two either side of the fuselage cross, black cross pattée Iron Crosses on the fuselage sides, the rudder and the wings, and the serial in black on the fuselage and fin. The shape comes from a published three-view drawing and the Idflieg type sheet, scaled to the 9.40 m span and 6.95 m length and checked against the photographs. The drawing is of a D.III, so the D.IIIa's rounded lower wingtips, larger tailplane and guns on the decking are taken from the photographs, and the size of the tailplane is estimated from them. The photographs are black and white, so the silver-grey shade is inferred, and the stripes under the tailplane follow a published caption.

Where to see one

Not on charge

Survivors are in museums abroad. None is in a UK museum.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.