Last verified 2026-11-21 against the gazetteer Compendium. Service bases and fleets change: check before travelling.
Not on charge
Where to see the Mitsubishi F1M in the UK
No complete example survives in a UK museum.
3D model
The F1M2 ‘P3-18’, Rabaul, 1943 in 3D
A procedural model built in Blender from the type’s published dimensions, painted as Mitsubishi F1M2 ‘Pete’ ‘P3-18’, photographed in flight over the Rabaul area: a two-seat Imperial Japanese Navy observation and reconnaissance floatplane biplane with a Mitsubishi Zuisei 13 fourteen-cylinder radial in a NACA cowling driving a two-blade propeller, elliptical single-bay wings spanning 11.00 m braced by single I struts and flying and landing wires, a single central main float on a pylon and struts, a stabilising float under each lower wing tip, an enclosed pilot’s canopy and an observer’s position open at the rear, and a tall rounded fin, shown resting on its floats: dark green upper surfaces and fuselage sides over grey undersides, a glossy black cowling and bright metal spinner, a white-edged hinomaru on the rear fuselage, plain red wing hinomaru, a white band round the main float and the code ‘P3-18’ in white on the fin (shape from a published F1M three-view, checked against photographs of the type; the markings follow a black-and-white US Navy photograph of this aircraft, so the grey undersides, the wing hinomaru and the red propeller tips, which it cannot show, follow standard Navy practice; the unit and date are from a kit marking listing and are unconfirmed). Drag to orbit, scroll or pinch to zoom · all 520 models · download .glb (1.1 MB) · Plate 127 in The Hangar
Type notes
The Mitsubishi F1M in brief
| Type | Mitsubishi F1M (F1M2 (Allied name ‘Pete’)) |
|---|---|
| UK museums holding one | None |
