3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Mitsubishi F1M2 ‘Pete’ ‘P3-18’, photographed in flight over the Rabaul area: a two-seat Imperial Japanese Navy observation and reconnaissance floatplane biplane with a Mitsubishi Zuisei 13 fourteen-cylinder radial in a NACA cowling driving a two-blade propeller, elliptical single-bay wings spanning 11.00 m braced by single I struts and flying and landing wires, a single central main float on a pylon and struts, a stabilising float under each lower wing tip, an enclosed pilot’s canopy and an observer’s position open at the rear, and a tall rounded fin, shown resting on its floats: dark green upper surfaces and fuselage sides over grey undersides, a glossy black cowling and bright metal spinner, a white-edged hinomaru on the rear fuselage, plain red wing hinomaru, a white band round the main float and the code ‘P3-18’ in white on the fin (shape from a published F1M three-view, checked against photographs of the type; the markings follow a black-and-white US Navy photograph of this aircraft, so the grey undersides, the wing hinomaru and the red propeller tips, which it cannot show, follow standard Navy practice; the unit and date are from a kit marking listing and are unconfirmed). Drag to orbit, scroll or pinch to zoom · download .glb (1.1 MB)
Data plate
Specification
- First flight1936
- Built~1,100
- Top speed~230 mph
- Engine1 × Mitsubishi Zuisei 13 fourteen-cylinder radial, 875 hp
- Crew2
- Wingspan11 m
- Length9.5 m
- Height4 m
- In service1940–1945 (Imperial Japanese Navy)
- RoleObservation floatplane
- MakerMitsubishi; also built by the Sasebo Naval Arsenal, Japan
- UK collections—
First flight, number built and top speed are for the whole family (F1M2 (Allied name ‘Pete’)); engine, crew and dimensions are for the F1M2 ‘P3-18’, Rabaul, 1943 modelled here.
History
The F1M2 ‘Pete’
In 1934 the Japanese Navy asked Mitsubishi, Aichi and Kawanishi for a two-seat observation seaplane to be catapulted from its battleships and cruisers, spot the fall of their shells and fight off enemy spotters. Mitsubishi’s design team, led by Joji Hattori, chose a biplane at a time when most new aircraft were monoplanes, because it could turn tightly and land slowly on the water. The first prototype flew in June 1936 and beat its rivals, but it bounced on take-off and was unsteady in the air.
Mitsubishi reworked it with new wings of a cleaner, more elliptical shape, a larger fin and the more powerful Zuisei radial, and in 1940 the Navy adopted it as the Type 0 Observation Seaplane, the F1M2. It was small and agile, with two fixed 7.7 mm machine guns firing forward and a third in the rear cockpit, and could carry two 60 kg bombs. Mitsubishi built 524 and the Sasebo Naval Arsenal 590, and with the prototypes about 1,100 were made. The Allies called it ‘Pete’.
The F1M2 served far more widely than its designers had planned. Besides flying from warships, it worked from seaplane tenders and sheltered harbours across the Pacific, from the Aleutians to the Solomons, escorting convoys, hunting submarines, bombing, carrying messages and even acting as a stop-gap fighter at bases where no airfield had yet been built. Many were lost in the fighting round Rabaul and Guadalcanal, and later ones were used as trainers and in suicide attacks. Wrecks have been found in the Pacific, but none survives complete.
This airframe
F1M2 ‘P3-18’, Rabaul area, about 1943
No complete F1M survives, so the model follows a single aircraft clearly photographed in flight: ‘P3-18’, seen in a US Navy photograph over the Rabaul area. A model-kit marking listing gives it to the 958th Naval Air Group in 1943, but no primary source confirms the unit or the date. The model shows it as photographed, resting on its floats: dark green upper surfaces and fuselage sides, a glossy black cowling with a bright metal spinner, a white-edged hinomaru on the rear fuselage, a white band round the main float and ‘P3-18’ in white on the fin. The photograph shows no yellow identification strips on the wings, so none are painted. It is black and white, so the grey undersides, the plain red wing hinomaru and the red propeller tips follow standard Navy practice. Its shape comes from a published F1M three-view, checked against photographs of the type; the drawing stands about 4.3 m high to the fin tip, a little more than the usual published 4.0 m, and the drawing is followed.
Where to see one
Not on charge
No complete example survives in a UK museum.