AP 118 · No. 11 Section II · Aircraft Plate 233 / 520

Plate 233 of 520 · Second World War · Carrier attack aircraft

Aichi B7A2 Ryusei

B7A2 ‘10’, Japan, 1945, painted as Aichi B7A2 Ryusei ‘Grace’ white ‘10’, photographed on a concrete apron in Japan in 1945: a two-seat Imperial Japanese Navy carrier attack aircraft with a Nakajima Homare 12 eighteen-cylinder radial driving a four-blade propeller, an inverted-gull mid-mounted wing spanning 14.40 m with two 20 mm cannon, an internal bomb bay, a long framed canopy over the pilot and the rear gunner, an aerial mast and a single fin, shown tail down on its wheels: dark green overall with a lighter grey-green rear fuselage and lower rudder, a white-edged hinomaru on the fuselage sides, plain red wing hinomaru, a blue-black cowling and a white ‘10’ on the fin (shape from two B7A three-views, checked against photographs; the markings follow three black-and-white photographs of this aircraft, so the colours are judgement calls: the undersides read dark and are painted green, and the light propeller and spinner are painted natural metal; the lower-wing hinomaru and yellow propeller tips, which no photograph shows, follow standard practice).

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Aichi B7A2 Ryusei ‘Grace’ white ‘10’, photographed on a concrete apron in Japan in 1945: a two-seat Imperial Japanese Navy carrier attack aircraft with a Nakajima Homare 12 eighteen-cylinder radial driving a four-blade propeller, an inverted-gull mid-mounted wing spanning 14.40 m with two 20 mm cannon, an internal bomb bay, a long framed canopy over the pilot and the rear gunner, an aerial mast and a single fin, shown tail down on its wheels: dark green overall with a lighter grey-green rear fuselage and lower rudder, a white-edged hinomaru on the fuselage sides, plain red wing hinomaru, a blue-black cowling and a white ‘10’ on the fin (shape from two B7A three-views, checked against photographs; the markings follow three black-and-white photographs of this aircraft, so the colours are judgement calls: the undersides read dark and are painted green, and the light propeller and spinner are painted natural metal; the lower-wing hinomaru and yellow propeller tips, which no photograph shows, follow standard practice). Drag to orbit, scroll or pinch to zoom · download .glb (1.1 MB)

Data plate

Specification

First flight, number built and top speed are for the whole family (B7A2 (Allied name ‘Grace’)); engine, crew and dimensions are for the B7A2 ‘10’, Japan, 1945 modelled here.

History

The B7A2 ‘Grace’

In 1941 the Japanese Navy asked Aichi for a single type that could do the work of both its carrier dive-bombers and its torpedo bombers, to fly from the large new armoured carriers then being built. It had to carry a torpedo or 800 kg of bombs in a bay inside the fuselage, dive like a dive-bomber and still fit a carrier’s lifts. Aichi’s design team answered with a big two-seater built round the new Nakajima Homare radial. To keep the main undercarriage short while leaving room for a large propeller and the bomb bay, the wing was mounted halfway up the fuselage and bent down at the roots into an inverted gull. The first prototype, the B7A1, flew in May 1942.

Trouble with the Homare engine held up development, and the production version, the B7A2, did not enter service until 1944. It was fast for its size, at about 350 mph, handled well and carried two 20 mm cannon in the wings as well as a machine gun for the rear gunner, so it could fight its way home. The Allies gave it the code name ‘Grace’. Its name, Ryusei, means shooting star.

By then the carriers it had been built for were gone: Taiho was sunk in the Battle of the Philippine Sea in June 1944 and the giant Shinano that November, before she had flown any aircraft. The Ryusei therefore served only from land bases in Japan, chiefly with the Yokosuka Naval Air Group and the 752nd Naval Air Group, attacking American ships in 1945. Production was hit by the Tonankai earthquake of December 1944 and by bombing of Aichi’s factories, and only about 114 were built. The fuselage of one, surrendered in 1945 and shipped to the United States for evaluation, is stored by the Smithsonian; no complete B7A survives.

This airframe

B7A2 white ‘10’, Japan, 1945

The airframe modelled

No complete B7A survives, so the model follows the Ryusei with the most photographs from different sides: a B7A2 with a white ‘10’ on its fin, photographed on a concrete apron in Japan in 1945, apparently after the surrender, from the port side, from the port front quarter and from head on. Its unit is not recorded in any source found. The model shows it as photographed, chocked and tail down on its wheels with no torpedo or bombs: dark green overall, with a lighter grey-green rear fuselage and lower rudder, a white-edged hinomaru on the fuselage sides, a blue-black cowling and a white ‘10’ on the fin. The photographs are black and white, so the colours are judgement calls: the undersides read as dark as the upper surfaces and are painted green, and the propeller and spinner read light and are painted natural metal. The hinomaru under the wings and the yellow propeller tips, which no photograph shows, follow standard practice. Its shape comes from two B7A three-views, checked against the photographs; the often-quoted height of 4.075 m matches no attitude of the drawings, so the drawings are followed.

Where to see one

Not on charge

No complete example survives.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.