3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as the Fiat G.55 Centauro on display at the Museo Storico dell’Aeronautica Militare at Vigna di Valle, rebuilt from a G.59 and painted as yellow ‘5’ of the Montefusco-Bonet squadriglia of the Aeronautica Nazionale Repubblicana (no G.55 is in a UK museum): a single-seat DB 605-engined fighter of 11.85 m span with a three-blade propeller, wide-track inward-retracting main gear and a radiator under the wing, dark olive green over light grey with ‘Bonet’ on the cowl, ANR flags on the fin and fuselage and ANR markings under the wings.. Drag to orbit, scroll or pinch to zoom · download .glb (1.1 MB)
Data plate
Specification
- First flight30 April 1942
- Built~300
- Top speed~390 mph
- EngineDaimler-Benz DB 605A 12-cylinder inverted-V, 1,475 hp (licence-built by Fiat as the RA.1050)
- Crew1
- Wingspan11.85 m
- Length9.37 m
- Height3.77 m
- In service1943–1950
- RoleMonoplane fighter
- MakerFiat Aviazione, Italy
- UK collections—
First flight, number built and top speed are for the whole family (G.55); engine, crew and dimensions are for the G.55 Serie I, Vigna di Valle (as 5 of the ANR Montefusco-Bonet squadron) modelled here.
History
The G.55
Giuseppe Gabrielli’s G.55 Centauro was the Italian answer to the problem that the Regia Aeronautica’s fighters were outpaced by Allied ones. It was an all-metal, low-wing monoplane built around the Daimler-Benz DB 605 engine, with a radiator under the wing and a wide-track inward-retracting undercarriage. The prototype first flew on 30 April 1942, and it was fast, strong and good to handle.
Production was slow. Only a few reached the Regia Aeronautica before the armistice of September 1943, and most of the roughly 300 built went to the Aeronautica Nazionale Repubblicana in the north, with a few to the Allied-aligned Italian air force. Armament was usually three 20 mm cannon and two 12.7 mm machine guns, and German evaluators rated it among the best fighters of the war in its class.
After the war the Italian air force kept the G.55 for a few years, and Fiat developed it into the G.59, a trainer and fighter that Syria and Argentina also bought. The two-seat G.55B trainer flew with the Italian air force into 1950.
This airframe
G.55 “5”, Vigna di Valle
No G.55 is in a UK museum, so the model follows the Serie I displayed at the Museo Storico dell’Aeronautica Militare at Vigna di Valle, near Rome, rebuilt from the G.59 MM53265 and painted as yellow ‘5’ of the Montefusco-Bonet squadriglia of the Aeronautica Nazionale Repubblicana. It wears dark olive green over light grey, a white ‘Bonet’ on each side of the cowl, a yellow ‘5’ and an ANR flag on the starboard fuselage only, a flag on each side of the fin and ANR markings under the wings. No serial is visible in the photographs, so none is painted. The photographs do not show the upper wing surfaces, so those are left unmarked, and the propeller diameter and radiator depth are the least certain dimensions.
Where to see one
Not on charge
Survivors are in Italian museums. None is in a UK museum.