AP 118 · No. 11 Section II · Aircraft Plate 480 / 520

Plate 480 of 520 · Cold War · Armed scout helicopter

Bell OH-58D Kiowa Warrior

OH-58D(I) Kiowa Warrior 92-00581, US Army Aviation Museum, Fort Novosel, painted as Bell OH-58D(I) Kiowa Warrior 92-00581 of the United States Army, rebuilt from OH-58A 71-20703 and preserved at the US Army Aviation Museum at Fort Novosel, Alabama (no OH-58 is in a UK museum): the Army’s armed scout helicopter, a JetRanger-derived airframe with a single Rolls-Royce (Allison) T703 turboshaft under an enlarged cowling, a four-bladed composite main rotor 35 ft across, a ball-shaped mast-mounted sight above the rotor hub, a two-bladed tail rotor on the left of the fin, a horizontal stabiliser with endplates, wire-strike cutters above and below the cockpit and high skid gear, shown parked level on its skids with the rotor in an X: olive drab overall, with black ‘0-00581’ on the forward cowling and black ‘UNITED STATES ARMY’ along the tail boom, dark grey rotor blades, the sight’s violet and orange-pink windows, an M260 seven-tube rocket pod on the starboard pylon and an XM296 .50 cal machine gun on the port pylon, and the starboard crew door off as photographed; the museum hangs the airframe in a banked climb, and the port-side markings are assumed to match the starboard.

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Bell OH-58D(I) Kiowa Warrior 92-00581 of the United States Army, rebuilt from OH-58A 71-20703 and preserved at the US Army Aviation Museum at Fort Novosel, Alabama (no OH-58 is in a UK museum): the Army’s armed scout helicopter, a JetRanger-derived airframe with a single Rolls-Royce (Allison) T703 turboshaft under an enlarged cowling, a four-bladed composite main rotor 35 ft across, a ball-shaped mast-mounted sight above the rotor hub, a two-bladed tail rotor on the left of the fin, a horizontal stabiliser with endplates, wire-strike cutters above and below the cockpit and high skid gear, shown parked level on its skids with the rotor in an X: olive drab overall, with black ‘0-00581’ on the forward cowling and black ‘UNITED STATES ARMY’ along the tail boom, dark grey rotor blades, the sight’s violet and orange-pink windows, an M260 seven-tube rocket pod on the starboard pylon and an XM296 .50 cal machine gun on the port pylon, and the starboard crew door off as photographed; the museum hangs the airframe in a banked climb, and the port-side markings are assumed to match the starboard. Drag to orbit, scroll or pinch to zoom · download .glb (742 KB)

Data plate

Specification

First flight, number built and top speed are for the whole family (OH-58A/C/D); engine, crew and dimensions are for the OH-58D(I) Kiowa Warrior 92-00581, US Army Aviation Museum, Fort Novosel modelled here.

History

The OH-58D Kiowa Warrior

In the 1960s the US Army held two competitions for a light observation helicopter. Hughes won the first with the OH-6, but when its price rose the Army reopened the contest in 1968, and Bell won with a military version of its Model 206A JetRanger. Designated OH-58A Kiowa, it reached the Army in 1969 and was soon in Vietnam, flying low with a pilot and an observer to find the enemy for gunships and artillery. More than 2,200 were built, and many A models were later brought up to OH-58C standard, with a more powerful engine and a flat-plate canopy to reduce glint.

In 1981 Bell won the Army Helicopter Improvement Program, which turned the Kiowa into a modern scout. The OH-58D, rebuilt from existing airframes, first flew on 6 October 1983. It had a much more powerful Allison engine under an enlarged cowling, a four-bladed composite main rotor in place of the old two-bladed one, and above the rotor hub a ball-shaped mast-mounted sight holding a television camera, a thermal imager and a laser rangefinder and designator. With only the ball showing over a tree line or a ridge, the crew could watch and mark targets for attack helicopters and artillery while the helicopter itself stayed hidden. A digital cockpit with two screens and a moving map came with it.

In 1987 and 1988 armed OH-58Ds flew from US Navy ships and barges in the Persian Gulf against Iranian minelaying boats, and their success led to the OH-58D(I) Kiowa Warrior, armed on two side pylons with Hellfire missiles, Stinger missiles, 2.75 in rocket pods or a .50 cal machine gun. Kiowa Warriors flew in the Gulf War, in the Balkans and in large numbers in Iraq and Afghanistan, where they supported troops on the ground at very low level and flew more combat hours than any other Army aircraft. The Army retired the type in 2017, handing the scout role to Apaches teamed with drones, and many airframes went to Croatia, Greece and Tunisia. None is in a UK museum.

This airframe

OH-58D(I) Kiowa Warrior 92-00581, US Army Aviation Museum

92-00581The airframe modelled

No OH-58 is in a UK museum, so the model follows a well-photographed survivor in the United States: OH-58D(I) Kiowa Warrior 92-00581, preserved at the US Army Aviation Museum at Fort Novosel, Alabama, the home of Army aviation. Like every OH-58D it began life as an earlier Kiowa: it was built as OH-58A 71-20703 and rebuilt as a Kiowa Warrior, taking a new serial. The museum hangs it in a banked climb; the model shows it parked level on its skids with the rotor in an X. It is olive drab overall, with black ‘0-00581’ on the forward cowling and black ‘UNITED STATES ARMY’ along the tail boom, and no unit badges or national insignia. It carries an M260 seven-tube rocket pod on the starboard pylon and an XM296 .50 cal machine gun with its ammunition box on the port pylon, and the starboard crew door is off, as photographed. The shape was measured from a three-view drawing of the OH-58D and checked against the dimensioned three-view of the OH-58A from which it was converted and a side-on photograph of another Kiowa Warrior, and matches the published rotor diameter and length with rotors turning. Some details are less certain. Every drawing and photograph puts the top of the sight higher than the published height of 12 ft 10⅝ in, and the model follows them, at 4.07 m. The port side was photographed only head-on, so its markings are assumed to match the starboard side. The stabiliser chord, the exact height of the weapons and the positions of some cowling grilles are estimates, and the rotor hub is simplified.

Where to see one

Not on charge

Survivors are in US museums. None is in a UK museum.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.