3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Rockwell B-1B Lancer 85-0074 'DY' of the 9th Bomb Squadron, 7th Bomb Wing, Dyess AFB, Texas, as shown at the ILA air show in Berlin in 2008 (no B-1 is in a UK museum): the swing-wing low-level bomber with its blended wing and body, wings parked fully forward at 15 degrees, paired General Electric F101 engines in fixed box-intake nacelles under the glove and small ride-control vanes on the nose, in overall Gunship Gray with a darker radome, a black fin band with a white bat, an Air Combat Command shield, DY and 074 on the fin, a low-visibility star-and-bar on the rear fuselage, a white zig-zag behind the radome and the crew ladder down.. Drag to orbit, scroll or pinch to zoom · download .glb (1.2 MB)
Data plate
Specification
- First flight18 October 1984
- Built100
- Top speedMach 1.2
- Engine4 × General Electric F101-GE-102 turbofans with afterburners, 30,780 lbf (136.9 kN) each
- Crew4
- Wingspan41.67 m
- Length44.5 m
- Height10.36 m
- In service1986–present
- RoleSwing-wing heavy bomber
- MakerRockwell International, Palmdale, United States
- UK collections—
First flight, number built and top speed are for the whole family (B-1B); engine, crew and dimensions are for the B-1B 85-0074 modelled here.
History
The B-1B
The B-1 began as the bomber meant to replace the B-52, a big swing-wing aircraft that could cross an ocean at height, dash at Mach 2.2 and get under Soviet radar at low level. The first of four B-1A prototypes, 74-0158, flew from Palmdale to Edwards Air Force Base on 23 December 1974 with Rockwell’s test pilot Charles Bock in command. Its wings swept from 15 to 67.5 degrees: forward for take-off, landing and economical cruising, back for speed. The programme’s cost made it a political target, and on 30 June 1977 President Carter cancelled production, preferring to put cruise missiles on the B-52s, though the prototypes went on flying tests.
President Reagan revived the bomber on 2 October 1981 and ordered 100, rebuilt around low-level penetration rather than speed at height. The B-1B traded the variable intakes of the B-1A for fixed ones with curved ducts that hid the engine fans from radar, which cut its top speed to Mach 1.25 and helped bring its radar return to about a fiftieth of a B-52’s. Small vanes on the nose worked with the lower rudder to steady the ride through low-level turbulence. On 29 August 1984 the second prototype, 74-0159, was lost in the Mojave Desert when a fuel transfer error left its centre of gravity far aft, killing Rockwell’s test pilot Doug Benefield. The first production B-1B flew on 18 October 1984, the first reached Dyess in Texas in June 1985, and the hundredth was delivered on 2 May 1988.
Built for nuclear war, the B-1B went to war with conventional bombs, first against Iraq in Operation Desert Fox in December 1998, and then over Kosovo in 1999. In the first six months over Afghanistan from 2001, eight B-1s dropped nearly 40 per cent of the coalition’s aerial ordnance, and on 7 April 2003 one attacked a Baghdad building where Saddam Hussein was thought to be, without killing him. Its nuclear arming hardware had been removed by 1995, and conversion under the New START treaty finished in 2011. Seventeen were retired from 2021, leaving 45, to be replaced by the B-21 Raider. No B-1 is in a UK museum.
This airframe
B-1B 85-0074
85-0074 served with the 9th Bomb Squadron of the 7th Bomb Wing at Dyess, Texas, and it stood on static display at the ILA air show at Berlin-Schönefeld in May 2008, where it was photographed from nose to tail. No full history of the airframe was found. The model shows it as it was there: overall Gunship Gray with a darker radome, a black fin band with a white bat, an Air Combat Command shield, DY and 074 on the fin, a dark IX disc and red rescue arrow on the nose, a white zig-zag behind the radome and a low-visibility star-and-bar on the rear fuselage, with the wings fully forward and the crew ladder down. The shape comes from a three-view of the B-1A, changed to a B-1B from photographs and a technical order drawing. The red nozzle covers it wore on some engines are left off to show the nozzles. The starboard nose markings are mirrored from the port side, the shield and disc are simplified, the wing droop follows the technical order’s wing tip clearance, and the level ground attitude could not be proved from a true side-on photograph.
Where to see one
Not on charge
Still in USAF service. Museum examples include the National Museum of the US Air Force. None is in a UK museum.