AP 118 · No. 11 Section II · Aircraft Plate 112 / 520

Plate 112 of 520 · Second World War · Dive-bomber and close-support biplane

Henschel Hs 123

Hs 123A-1, 52+A13, 3./StG 165, painted as a Henschel Hs 123A-1 coded 52+A13 of 3./StG 165 ‘Immelmann’ at Kitzingen about 1937 (no Hs 123 survives in a UK museum), modelled from a three-view drawing and photographs of that airframe and its neighbours: the single-seat sesquiplane dive-bomber, 10.5 m in span, with an open cockpit, a BMW 132 radial in a ring cowl, boot-shaped wheel spats and a splinter camouflage of RLM greens over light grey undersides..

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as a Henschel Hs 123A-1 coded 52+A13 of 3./StG 165 ‘Immelmann’ at Kitzingen about 1937 (no Hs 123 survives in a UK museum), modelled from a three-view drawing and photographs of that airframe and its neighbours: the single-seat sesquiplane dive-bomber, 10.5 m in span, with an open cockpit, a BMW 132 radial in a ring cowl, boot-shaped wheel spats and a splinter camouflage of RLM greens over light grey undersides.. Drag to orbit, scroll or pinch to zoom · download .glb (895 KB)

Data plate

Specification

First flight, number built and top speed are for the whole family (Hs 123A); engine, crew and dimensions are for the Hs 123A-1, 52+A13, 3./StG 165 modelled here.

History

The Hs 123

The Hs 123 was built to a 1933 requirement for a dive-bomber, and Henschel’s answer was a single-seat sesquiplane: a big upper wing, a much smaller lower one and a stout radial engine. The prototype flew in the spring of 1935, and it beat the Fieseler Fi 98 in the competition. It was an old-fashioned layout even then, but it was strong, simple to maintain and very accurate in a dive.

Production aircraft went to Stukageschwader 165 ‘Immelmann’ in 1936, and a few were tried in the Spanish Civil War. In Poland in 1939 and France in 1940 the Hs 123 proved its worth as a close-support aircraft, where its noise in a dive frightened troops on the ground. The Luftwaffe kept it in front-line service on the Eastern Front long after faster types had replaced it, because it could operate from rough fields and take heavy damage.

Production ended in 1938 after some 604 aircraft, and the last were withdrawn in 1944 for want of spares. No Hs 123 survives in the UK. A few examples are preserved abroad, among them an aircraft rebuilt from wreckage in Germany.

This airframe

Hs 123A-1 52+A13, 3./StG 165

52+A13The airframe modelled

No Hs 123 survives in a UK museum, so the model follows a machine of 3./StG 165 ‘Immelmann’ at Kitzingen about 1937, coded 52+A13, from a three-view drawing and photographs of that airframe and its neighbours B13 and C13. It wears a splinter camouflage of dark and mid green on the upper surfaces and light grey below, a black white-edged cross aft of the headrest, a white disc and swastika on the fin, and the code either side of the cross. The colours are read from black-and-white photographs, so the shades follow the usual 1937 values.

Where to see one

Not on charge

No complete example survives.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.