AP 118 · No. 11 Section II · Aircraft Plate 29 / 520

Plate 29 of 520 · Great War · Single-seat sesquiplane fighter

Nieuport 17

Nieuport 17 C.1 N2474, Langley Field, June 1917, painted as Nieuport 17 C.1 N2474, one of the French fighters shipped to the United States for evaluation and photographed from every side at Langley Field, Virginia, on 18 June 1917 (no Nieuport 17 is held by a UK museum): a small single-seat sesquiplane fighter with a 110 hp Le Rhône 9J rotary engine in an engine-turned aluminium cowling, the broad upper wing and narrow single-spar lower wing joined by the type's V-shaped interplane struts, a synchronised Vickers gun on the decking and an empty overwing gun rail on the centre section, the rounded comma-shaped rudder with no fixed fin, shown resting tail-down on its skid; shape from Serge Desmet's three-view and a second published side profile, scaled to the 8.16 m span, and checked against nine Signal Corps and Harris & Ewing photographs of N2474, with the finish those photographs show: aluminium-doped fabric with bare aluminium nose panels, French cocardes above and below the upper wing and under the lower wing only, none on the fuselage, the blue, white and red rudder carrying 'N 2474' and the weight stencil, and '2474 TYPE 17' on the port rear fuselage; the colours are standard French dope and national colours because every photograph is black and white.

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Nieuport 17 C.1 N2474, one of the French fighters shipped to the United States for evaluation and photographed from every side at Langley Field, Virginia, on 18 June 1917 (no Nieuport 17 is held by a UK museum): a small single-seat sesquiplane fighter with a 110 hp Le Rhône 9J rotary engine in an engine-turned aluminium cowling, the broad upper wing and narrow single-spar lower wing joined by the type's V-shaped interplane struts, a synchronised Vickers gun on the decking and an empty overwing gun rail on the centre section, the rounded comma-shaped rudder with no fixed fin, shown resting tail-down on its skid; shape from Serge Desmet's three-view and a second published side profile, scaled to the 8.16 m span, and checked against nine Signal Corps and Harris & Ewing photographs of N2474, with the finish those photographs show: aluminium-doped fabric with bare aluminium nose panels, French cocardes above and below the upper wing and under the lower wing only, none on the fuselage, the blue, white and red rudder carrying 'N 2474' and the weight stencil, and '2474 TYPE 17' on the port rear fuselage; the colours are standard French dope and national colours because every photograph is black and white. Drag to orbit, scroll or pinch to zoom · download .glb (952 KB)

Data plate

Specification

First flight, number built and top speed are for the whole family (17); engine, crew and dimensions are for the Nieuport 17 C.1 N2474, Langley Field, June 1917 modelled here.

History

The Nieuport 17

Gustave Delage's Nieuport 11, the little "Bébé" of 1915, had helped end the Fokker scourge over Verdun. Its successor, the Nieuport 17, first flew in January 1916. It was a slightly larger aircraft with a stronger structure and the 110 hp Le Rhône 9J rotary engine in place of the Bébé's 80 hp Le Rhône. It kept Delage's sesquiplane layout: a broad upper wing and a lower wing of much narrower chord, built round a single spar and braced to the upper wing by V-shaped interplane struts. The arrangement gave the pilot a good view downwards and made the aircraft light and quick to roll and climb.

The Nieuport 17 reached the French escadrilles in the spring of 1916 and was soon the best Allied fighter over Verdun and the Somme. French aircraft carried a Vickers gun synchronised to fire through the propeller; the Royal Flying Corps and the Royal Naval Air Service, which bought it in numbers, usually fitted a Lewis gun on a Foster mounting above the upper wing, which the pilot could pull down to reload. Georges Guynemer, Charles Nungesser and Albert Ball all scored many of their victories in Nieuport 17s. Its weakness was the narrow lower wing, which could twist and break away in a hard dive.

It was built in France and under licence by Macchi in Italy and Dux in Russia, and flew with Belgium, Russia, Italy and later the United States, which bought Nieuports to train its pilots in France. The Germans paid it the compliment of copying it: the Siemens-Schuckert D.I was a near copy, and the Albatros D.III took up its sesquiplane wings and V-struts. By the middle of 1917 the SPAD VII and the S.E.5 were replacing it at the front. Reproductions fly in several countries, but no original Nieuport 17 is held by a UK museum.

This airframe

Nieuport 17 C.1 N2474, Langley Field, June 1917

N2474The airframe modelled

No gazetteer museum holds a Nieuport 17, so the model follows N2474, one of the French fighters shipped to the United States for evaluation in 1917. On 18 June 1917 it was photographed from every side at Langley Field, Virginia, by the US Army Signal Corps and by Harris & Ewing; nine of those photographs, now in the US National Archives and the Library of Congress, make it one of the best-recorded single airframes of the type, better than the aces' machines, whose markings are only partly known. It is shown as they show it: aluminium-doped fabric with a bare engine-turned aluminium cowling and aluminium panels around the cockpit, French cocardes above and below the upper wing and under the lower wing only, none on the fuselage, a blue, white and red rudder carrying "N 2474" and the weight stencil, "2474 TYPE 17" stencilled on the port rear fuselage, a Vickers gun on the decking and an empty gun rail on the upper wing. The shape comes from Serge Desmet's published three-view and a second side profile, scaled to the 8.16 m span and checked against the photographs. The photographs are black and white, so the colours are the standard French dope and national colours.

Where to see one

Not on charge

Reproductions and restorations fly worldwide. Complete originals in UK museums are scarce.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.