AP 118 · No. 11 Section II · Aircraft Plate 30 / 520

Plate 30 of 520 · Great War · Two-seat high-altitude reconnaissance biplane

Rumpler C.IV

Rumpler C.IV C.8500/16, Flieger-Abteilung 7, 1917, painted as Rumpler C.IV C.8500/16 of Flieger-Abteilung 7, individual number 3, later captured by the British and numbered G.117 (the only survivor, in the Deutsches Museum in Munich, is a restoration with one side of its fuselage left unskinned): a large two-seat reconnaissance biplane with a plywood-skinned fuselage, a 260 hp Mercedes D.IVa six-cylinder engine with its cylinders exposed and a tall exhaust stack rising ahead of the upper wing, a radiator under the upper wing centre section, the swept two-bay wings with Rumpler's raked upper wingtips and rounded lower tips, the near-circular two-lobed tailplane, a fixed LMG 08/15 for the pilot and a Parabellum gun on the observer's ring, shown resting tail-down on its skid; shape from Herris and Pearson's published drawings, scaled to the 12.66 m span and 8.40 m length and checked against the general arrangement Flight published in 1918 and photographs of C.8500/16 in German service and after capture, with the finish those photographs show: the unit's white forward-pointing arrow on both sides and the top decking, the number 3 outlined in white, white-edged iron crosses on the fuselage, rudder and wings, pale interplane struts and a dark undercarriage; the colours (a red-brown and green fuselage, green and mauve upper surfaces and light blue undersides) are inferred because every photograph is black and white.

3D model

Turn it over

A procedural model built in Blender from published dimensions, drawings and photographs, painted as Rumpler C.IV C.8500/16 of Flieger-Abteilung 7, individual number 3, later captured by the British and numbered G.117 (the only survivor, in the Deutsches Museum in Munich, is a restoration with one side of its fuselage left unskinned): a large two-seat reconnaissance biplane with a plywood-skinned fuselage, a 260 hp Mercedes D.IVa six-cylinder engine with its cylinders exposed and a tall exhaust stack rising ahead of the upper wing, a radiator under the upper wing centre section, the swept two-bay wings with Rumpler's raked upper wingtips and rounded lower tips, the near-circular two-lobed tailplane, a fixed LMG 08/15 for the pilot and a Parabellum gun on the observer's ring, shown resting tail-down on its skid; shape from Herris and Pearson's published drawings, scaled to the 12.66 m span and 8.40 m length and checked against the general arrangement Flight published in 1918 and photographs of C.8500/16 in German service and after capture, with the finish those photographs show: the unit's white forward-pointing arrow on both sides and the top decking, the number 3 outlined in white, white-edged iron crosses on the fuselage, rudder and wings, pale interplane struts and a dark undercarriage; the colours (a red-brown and green fuselage, green and mauve upper surfaces and light blue undersides) are inferred because every photograph is black and white. Drag to orbit, scroll or pinch to zoom · download .glb (1.3 MB)

Data plate

Specification

First flight, number built and top speed are for the whole family (C.IV); engine, crew and dimensions are for the Rumpler C.IV C.8500/16, Flieger-Abteilung 7, 1917 modelled here.

History

The C.IV

Edmund Rumpler's company at Johannisthal, outside Berlin, built some of the most successful German two-seaters of the First World War. The C.IV of late 1916 grew out of the C.III, with a new tail and the 260 hp Mercedes D.IVa in place of the Benz engine. It kept the family's swept two-bay wings, with their raked upper tips, and gained a near-circular, two-lobed tailplane. The observer had a camera and a Parabellum gun on a ring mounting, and the pilot a fixed LMG 08/15 firing through the propeller.

Trouble building the fuselage held up production, and the C.IV reached the front in the spring of 1917. Once there, it was valued above all for its height. It could work above 6,000 m, higher than most Allied fighters could climb, so its crews could photograph the lines and the back areas in comparative safety, at the cost of hours of intense cold in an open cockpit.

Rumpler built the C.IV in large numbers, and Pfalz built it under licence, first as the Pfalz C.I. A twin-float fighter for the navy, the 6B 2, was developed from it. The C.IV stayed in front-line service to the end of the war. One survives, in the Deutsches Museum in Munich, restored with one side of its fuselage left unskinned; none is in a UK museum.

This airframe

C.IV C.8500/16, Flieger-Abteilung 7, 1917

C.8500/16The airframe modelled

No gazetteer museum holds a Rumpler C.IV, and the one survivor, in Munich, is a restoration in restored markings with part of its fuselage left unskinned, so the model follows C.8500/16 of Flieger-Abteilung 7, the best-photographed single C.IV. It was photographed with its crew in German service, and after the British captured it and numbered it G.117 it was photographed again from every side; Flight drew its general arrangement of the type from it in 1918. It is shown as it was in German service: the unit's white arrow pointing forward on both sides of the fuselage and on the top decking, the individual number 3 outlined in white, white-edged iron crosses on the fuselage sides, rudder and wings, pale interplane struts and a dark undercarriage and propeller. The shape comes from J. Herris and Bob Pearson's published drawings, scaled to the 12.66 m span and 8.40 m length and checked against the Flight drawing and the photographs. Every photograph is black and white, so the colours are inferred: a red-brown fuselage with green areas, following Herris's colour profile, green and mauve upper surfaces and light blue undersides.

Where to see one

Not on charge

Survivors are in museums abroad. None is in a UK museum.

All 520 plates

Profiles and models are procedural interpretations built in Blender from published dimensions, three-view drawings and photographs of each airframe. Treat the museum aircraft as the reference.