3D model
Turn it over
A procedural model built in Blender from published dimensions, drawings and photographs, painted as Polikarpov I-16 Type 24 single-seat fighter, the flying example of the Flying Heritage Collection, Everett, Washington (no I-16 is in a UK museum): a stubby low-wing monoplane with a deep nine-cylinder radial cowl, a two-blade propeller, an open cockpit behind a low windscreen and a tailwheel undercarriage, shown on its wheels with the tail down as photographed: one overall dark protective green with a light grey-blue underside, gear legs and wheel hubs, red unbordered stars on the rear fuselage and under the wings, a red-outlined '4' on the rudder, a black propeller with yellow tips and a green spinner; no upper-wing star is photographed so none is painted, the sliding hood is not modelled and the nine cowl openings are a judgement from the photographs. Drag to orbit, scroll or pinch to zoom · download .glb (823 KB)
Data plate
Specification
- First flight30 December 1933
- Built~8,640
- Top speed~275 mph
- Engine1 × Shvetsov M-62 air-cooled radial, 1,000 hp
- Crew1
- Wingspan9 m
- Length6.07 m
- Height3.25 m
- In service1934–1945 (Soviet Union, Spain, China)
- RoleFighter
- MakerPolikarpov OKB; built at Moscow, Gorky and elsewhere, Soviet Union
- UK collections—
First flight, number built and top speed are for the whole family (I-16 Type 24); engine, crew and dimensions are for the I-16 Type 24 '4', Flying Heritage Collection, Everett modelled here.
History
The I-16
Nikolai Polikarpov designed the I-16 as a short, stubby monoplane with a deep radial engine and a small wing, and Valery Chkalov flew the prototype, the TsKB-12, on 30 December 1933. It was the first low-wing monoplane fighter with retractable undercarriage to enter large-scale service anywhere in the world. The wheels were wound up into the fuselage by hand with a crank in the cockpit, and the wing was a wooden structure with a metal centre section.
It was fast and very agile, but it was twitchy and unforgiving to fly, with little warning before a stall. It fought in Spain from 1936, where Republican pilots called it the Mosca (fly) and Nationalist pilots the Rata (rat), and in China and at Khalkhin Gol in 1939. The Type 24 was a late version with the 1,000 hp M-62 engine, and it was one of the main Soviet fighters when Germany invaded in June 1941.
By then it was outclassed by the Messerschmitt Bf 109, but it stayed in front-line use well into 1942. About 8,600 of all versions were built. A few have been rebuilt to fly, and no I-16 is in a UK museum.
This airframe
I-16 Type 24 “4”, Flying Heritage Collection, Everett
No I-16 is in a UK museum, so the model follows the flying I-16 Type 24 of the Flying Heritage Collection in Everett, Washington, which is well photographed from all sides. Its shape was measured from a published three-view drawing and is built to the published span and length. It is shown on its wheels with the tail down and the cockpit open, as photographed: one overall dark protective green with a light grey-blue underside, undercarriage legs and wheel hubs, red unbordered stars on the rear fuselage and under the wings, a red-outlined “4” on the rudder, a black two-blade propeller with yellow tips and a green spinner. No star is photographed on the upper wing, so none is painted. The sliding hood is not modelled, and the nine openings in the cowl front are a judgement from the photographs.
Where to see one
Not on charge
Survivors and restorations fly in Russia and Spain. None is in a UK museum.